Adjust the brightness by turning the bright contr, Adjust the sound volume by turning the vol control, After you finish using the glasstron – Sony PLM-S700 User Manual
Page 32: Checking the display indication
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
**»•■'>............. ... -- r‘^
.Vvs*
Using the Glasstron (continued)
Adjust the brightness by turning the BRIGHT contr
/
BRIGHT ^
\
darker -*-> brighter
Adjust the sound volume by turning the VOL control.
When you set AVLS in the menu to on, you cannot turn up the volume beyond the defir.
limit (see page 38). If the audio input level is too high, the sound may be distorted. Turn
the volume down using the VOL control.
lower louder
After you finish using the
Glasstron
Take off the Glasstron, and turn off the
power.
Checking the display
indication
Press the jog dial while the picture is
displayed. The display indication appea
on the screen for five seconds.
(page 42)
■ When using the AC power adapter, the
" mi: " mark appears on the screen.
32-'
us