Connecting the video equipment, Cormecting the video equipment, Connecting the glasstron (continued) – Sony PLM-S700 User Manual
Page 18
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
K.)- .
Connecting the Glasstron (continued)
Connecting the video equipment
Connect a VCR, laser disc player, DVD player, or camcorder to the power sup- / box using one
of the audio/vicjeo cables (supplied) as shown below. When you connect the ’ .^sstron to the
video equipment, set the PC-'^DEO switch on the power supply box to "VIE
Note
Do not use the audio, audio/video or S-video connecting cables, which are 9.8 fc (3m) or longer. The
performance mav be reduced.
VCR, laser disc player, DVD player,
camcorder, etc.
Set the PC-VIDEO switch
to "VIDEO."
AUDIO/VIDEO'S,
to AUDIO/VIDEO connector
Audio/video cable (supplied)
(specidl miniplug
■ *—*
phono plug)
to audio/video output
^ ■
isa-'
to audio/video outputs
Video (yellow)
Audio L (white)
Audio R (red)
: Signal flow
Audio/video cable (supplied)
(special miniplug
*—*■
special miniplug)
Camcorder, etc.
18
-us