Viewing the surrounding environment, Turn the see-through dial, Set the screen switch to on – Sony PLM-S700 User Manual
Page 34
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Viewing the surrounding environment
While you are wearing the Glasstron, you can view the surrounding en\ ^nment through the
screen in two w^avs;
Viewing the'surrounding
environment by adjusting the
transparency of the entire
screen (See-through mode)
You can adjust the level of transparency of
the entire screen with the LCD shutter dial.
¡1
.
•*;
i
1
The picture becomes
transparent.
The area surrounding
the picture also becomes
transparent.
Turn the SEE-THROUGH dial.
i ^
SEE
CLOl
■ -THRO
SE----
UGH
)PEN
J
Note
If there is a bright light near the display unit,
you may not be able to completely black out
the surrormding environment bv adjusting the
SEE-THROUGH dial.
Viewing the i rrounding
environment i the area
around the ^ cture only
(Screen mo a)
You can adjust :• level of transparency of
the screen area around the picture only. The
picture remains intact.
The picture remains
intact.
The area surrounding
the picture also becomes
transparent
Set the SCREEN switch to
ON.
In this mode, the screen does not
become transparent even if you turn
the SEE-THROUGH dial.
Notes
• When you set the SCREEN switch to ON, the
edges of the picture may fade a bit, but this is
not a malhmction.
• If there is a bright light near the display unit,
you may not be able to completely black out
the surrormding environment arround the
picture by adjusting the SEE-THROUGH dial
when you set the SCREEN switch to on.
34
-us