Sony KL-W7000 - Manual (Page 16)

Adjusting the
computer picture
Adjusting the position (CENTER)
The CENTER adjustment screen automatically
disappears after about 10 seconds if you do not press
any button. You can also erase the CENTER adjustment
screen by pressing CENTER/SIZE again.
To reset to the factory preset setting
Press RESET on the monitor. At the same time, the
picture size (page 17) and video/audio settings (pages
18
to 22 ) are also reset to the factory preset levels.
Note
• You can adjust the position by using the CENTER/SIZE and
o/O/O/iC» buttons on the monitor.
. *
@ i
o
After projecting the picture from a computer, you may
need to adjust the position of the picture to fit the
monitor screen. You can also move the picture as you
like. The setting is only for the input signal displayed
on the screen.
1
Press CENTER/SIZE until the CENTER
adjustment screen appears.
CENTER/
SIZE
CENTER
K CENTER
U CENTER
------------ ]«
2
Press 4>, 4^,
4
or to adjust the position.
For horizontal adjustment press 4 or 4 . (H
CENTER)
to move the picture right
to move the picture left
0 0“
For vertical adjustment press ♦ or ♦ . (V CENTER)
0
0
to move the picture up
V, to move the picture down
^ 5'^^ Operations