Cleaning the air filter, 2 remove the front panel from the monitor, 3 pull the air filter upwards to remove – Sony KL-W7000 User Manual
Page 24: 5 attach a new filter to the monitor, 6 mount the front panel, Notes
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Additional Information
Cleaning the air
filter
The air filter should be cleaned once a month. When it
becomes difficult to remove the dust, replace the filter
with a new one. To clean the filter, follow the steps
below.
1 Turn off the power switch on the monitor
and unplug the power cord.
2
Remove the front panel from the monitor.
Pull the panel towards you, holding its left
end. Be careful not to damage your nails.
3
Pull the air filter upwards to remove.
Remove the dust from the filter with a
vacuum cleaner.
5
Attach a new filter to the monitor.
Fit the six projections securely.
6
Mount the front panel.
Be careful not to injure the speakers.
Notes
• Clean the air filter periodically. Otherwise, the temperature
inside the monitor may rise abnormally.
• Do not use a torn filter. Fit the six projections on the filter to the
monitor securely. Dust inside the monitor may cause distorted
picture and also fire.
• Be sure to attach the air filter securely. Otherwise, the monitor
will not turn on.
• Contact your Sony dealer for a new filter.
2 4 E N
Additional Information