Sony KL-W7000 - Manual (Page 17)

Adjusting the picture size (SIZE) Adjusting the clarity of the picture
(DOT PHASE)
©
© ®
©
O
After projecting the picture from a computer, you may
need to adjust the picture size to fit the monitor screen.
The setting is only for the input signal displayed on the
screen.
1
Press CENTER/SIZE until the SIZE adjustment
screen appears._________________________
CENTER/
SIZE
SIZE
H SIZE
911^^
U SIZE
2
Press
4
or
f
to adjust the picture size.
For horizontal adjustment press or 4. (H SIZE)
® ©■«
to increase horizontal size
to decrease horizontal size
For vertical adjustment press 4 or 4. (V SIZE)
©
©
to increase vertical size
to decrease vertical size
The SIZE adjustment screen automatically disappears
after about 10 seconds if you do not press any button.
You can also erase the SIZE adjustment screen by
pressing CENTER/SIZE again.
To reset to the factory preset setting
Press RESET on the monitor. At the same time, the
picture position (page 16) and video/audio settings
(pages 18
to 22 ) are also reset to the factory preset
levels.
Notes
• For a picture with resolution of 640 x 350, 640 x 400 or 640 x
480, the vertical size cannot be increased from the size that was
projected the first time.
• You can adjust the size using the CENTER/SIZE and o / O / O /
s> buttons on the monitor.
©
© ©
©
MENU
G 3
ENTER
CD
If the computer picture flickers or blurs, or horizontal
noise appears on the screen, adjust DOT PHASE to get
a clearer picture.
1
Press MENU.
2
Press 4 or 4 to select OPTION, and press bm
ENTER. E2I
<T
©
©
ENTER
3
Press 4 or 4 to select DOT PHASE, and press
ENTER.
<T
©
©
ENTER
OPTION ^
AUTO
SHUT OFF:OFF
language : ENGLISH
DOT phase : 16
4
Press 4, 4, 4 or 4 to adjust the level to
obtain a clear picture.
®o®
5
Press MENU to return to the original screen.
Note
• You cannot use this function for the input from VIDEO IN.
Operations 1 y-EN