To eject the cassette, To prevent accidental erasure – Sony CCD-TR416 User Manual
Page 10
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
VA-‘-v^
hJ^ÉÉiiiyiliiiki
Mak«.' suro tliat the pi>wor souroo is installed. When vc'u u ant to record in the 1 iiS
system, use HiS \ ideo cassette HiH (CCD-I Knlo onh ).
(1) While prossini; the small blue button on the hJECT switch, slide it in the
direction ot the arrow . The cassette compartment automaticalK lifts up and
opens.
(
2
)
Insert a cassette \\ ith the window facing out.
(3)
Close the cassette compartment b\- pressing the "PUSH" mark on the cassette
compartment. The cassette compartment automaticalK' gt'es down.
To eject the cassette
While pressing the small blue button on the HJECT switch, slide it in the direction of the
arrow.
To prevent accidental erasure
Slide the tab on the cassette to expose the red mark. If you insert the cassette with the
red mark exposed and close the cassette compartment, the beeps sound for a while. If
you try to record with the red mark exposed, the ;.iD and
ii
indicators flash, and you
cannot record.
To re-record on this tape, slide the tab back out covering the red mark.
10