Notes on the tape counter, Note on the beep sound, Note on the auto date feature – Sony CCD-TR416 User Manual
Page 13
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
m
Notes on the tape counter
• The tape counter indicates the recording or playback time. Use it as a guide. There
will be a time lag ot several seconds from the actual time, lo set the counter to zero,
press COUN'ITRRESFT,
• It the tape is recorded in SR and l.R modes mixed, the tape counter shows incorrect
recording time. When vou intend to edit the tape using the tape counter as a guide,
record in same (SR (ir LR) mode.
Note on the beep sound
The beep sounds when you operate the camcc'^der. Se\ eral beeps also sound as a
warning of any unusual condition of the camcorder.
Note that the beep sound is not recorded on the tape. If \ ou do not want to hear the
beep sound, select ''OFF" in the menu system.
Note on the AUTO DATE feature
The clock is set at the factory to Tokyo time for the models sold in japan, and to Hong
Kong, New 'I'ork (^r Ranama time for other models. You can reset the clock in the menu
system. You can change the AUTO DATF settings by selecting ON or OFF in the menu
s\’slem. The .YLTC') DATE feature shows the date automatically once a day.
However, the date may automatically appear more than (Mice a day when;
- you reset the date and time.
-you eject and insert the tape again.
- you stop recording within 10 seconds.
- you set AUTO DATE to OFF once and set it to ON again in the menu system.
13