Removing dust from inside the viewfinder, Ccd-tr315 only, To reattach the eyecup – Sony CCD-TR416 User Manual
Page 60: Caution
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Removing dust from inside the viewfinder
-CCD-TR315 only
(1)
Remove the screw with a screwdri\ er (not supplied). Then, while sliding the
KHhEASE knob, turn the evecup in the direction of the arrow and pull it out.
(
2
) Clean the surface with a blower sold on the market.
To reattach the eyecup
(1)
Align the groove on the eyecup with the • mark on the barrel.
(2)
Turn the eyecup in the direction of the arrow. 1 hen replace the screw.
Caution
Do not remove any other screws. You may remove only the screw to remove the
eyecup.
59
Advertising
This manual is related to the following products: