Inserting a cassette, To eject the cassette, To prevent accidental erasure – Sony CCD-TRV615 User Manual
Page 12
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Inserting a cassette
Make sure that the power source is installed. When you want to record in the Hi8
system, use Hi8 video cassette Hi0.(CCD-TRV65/TRV615 only)
(1) While pressing the small blue button on the EJECT switch, slide it in the
direction of the arrow. The cassette compartment automatically lifts up and
opens.
(2)
Insert a cassette with the window facing out.
(3)
Close the cassette compartment by pressing the "PUSH" mark on the cassette
compartment. The cassette compartment automatically goes down.
To eject the cassette
while
pressing the small blue button on the EJECT switch, slide it in the direction of the
To prevent accidental erasure
Slide the tab on the cassette to expose the red mark. If you insert the cassette with the
red mark exposed and dose the cassette compartment, the beeps sound for a while. If
you try to record with the red mark exposed, the and
—
indicators flash, and you
cannot record.
To re-record on this tape, slide the tab back out covering the red mark.
12