Charging the battiiy pack, Note, Installing and charging the battery pack – Sony CCD-TRV615 User Manual
Page 8
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Installing and charging the battery pack
Charging the battiiy pack
Charge the battery pack on a flat surface without vibration. The battery pack is charged
a little in the factory.
(1) Open the DC IN jack cover and connect the supplied AC power adaptor to the
DC IN jack with the plug's A mark up.
(
2
)
Connect the power cord to the AC power adaptor.
(3) Connect the power cord to a wall outlet.
(4) Slide the POWER switch to OFF. Remaining battery time is indicated by the
minutes on the display window. Charging begins.
When the remaining battery indicator becomes
normal charge
is completed. For
full charge,
which allows you to use the battery longer than usual, leave the battery
pack attached for about 1 hour after normal charge is completed and until FULL
appears on the display window. Unplug the AC power adaptor from the camcorder.
You can also use the battery pack before it is completely charged.
Before using the camcorder with the battery pack, unplug the AC ¡x)wer adaptor from
the DC IN jack of the camcorder.
POW ER
■ ICAM ERAI
11^15
■ OFF
■
■an»
a
Note
"------min" appears in the display window until the camcorder calculates remaining
battery time.
8