Editing onto another tape, Before editing, Starting editing – Sony CCD-TRV615 User Manual
Page 57: To edit more scenes, To superimpose the title while you are editing, To stop editing
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Editing onto another tape
You can create your own video program by editing with any other
0
8 mm,
HI0
Hi8,
Mia VHS, SVBa S-VHS, raas VHSC, sssa S-VHSC, R3 Betamax or Hgsig ED Betamax
VCR that has video/audio inputs.
Before editing "
Connect the camcorder to the VCR using the supplied A/V connecting cable.
Set the input selector on the VCR to LINE, if available.
Set EDIT to ON in the menu system (p. 29).
Starting editing
ieiSlo.-
,
>
Turn down the volume of the camcorder while editing. Otherwise, picture distortion n
may occur.
“■
(1)
Insert a blank tape (or a tape you want to record over) into the VCR, and insert "g
your recorded tape into the camcorder.
3
(2)
Play back the recorded tape on the camcorder until you locate the point where g
you want to start editing, then press I i to set the camcorder in playback pause
mode.
(3)
On the VCR, locate the recording start point and set the VCR in recording
pause mode.
(4)
Press II on the camcorder and VCR simultaneously to start editing.
To edit more scenes
Repeat steps 2 to 4.
To superimpose the title while you are editing
You can superimpose the title while you are editing. Refer to "Superimposing a title"
(p. 48).
To stop editing
Press ■ on both the camcorder and the VCR.
Note on Fine Synchro Edit
If you connect a video deck that has the Fine Synchro Edit feature to the LANC C jack
of the camcorder, using a LANC cable (not supplied), the edit will be even more
precise.
57