Installing and charging the battery pack, Installing the battery pack – Sony CCD-TRV615 User Manual
Page 7
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Getting started
Installing and charging the battery pack
Before using your camcorder, you first need to install and charge the battery pack.
Installing the battery pack
(1)
While pressing ВАТТ RELEASE, slide the battery terminal cover in the
direction of the arrow.
(2)
Install the battery pack in the direction of the T mark on the battery pack. Slide
the battery pack down until it catches on the battery release lever and clicks.
Attach the battery pack to the camcorder securely.
Note on the battery pack
Do not carry the camcorder by grasping the battery pack.
Advertising
This manual is related to the following products: