Releasing the steady shot function, Ccd-trv25/trv35/trv65/trv215n'rv315n'rv615 only, To activate the steady shot function again – Sony CCD-TRV615 User Manual
Page 53: Notes on the steady shot function
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Releasing the STEADY SHOT function
- CCD-TRV25/TRV35/TRV65/TRV215n'RV315n'RV615 only
When the Steady Shot function is working, the camcorder compensates for camera-
shake.
You can release the Steady Shot function when you do not need to use the Steady Shot
function. Do not use the Steady Shot function when shooting a stationary object with a
tripod.
You can select ON or OFF in the menu system (p. 29).
To activate the Steady Shot function again
Set STEADYSHOT to ON in the menu system.
Notes on the Steady Shot function
• The Steady Shot function will not correct excessive camera-shake.
• When you switch the STEADY SHOT function on or off, the exposure may fluctuate.
• Steady Shot does not operate in 16:9 FULL mode. If you set STEADYSHOT to ON, the
''ff indicator flashes.
>
a.
53