Connecting to a tv or vcr – Sony INT-W100 User Manual
Page 7
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Connecting to a TV or VCR
Connecting to a TV with an
S-VIDEO jack
(Best picture quality)
Caution
ifi/OK connect your Internet Terminal to
a projection TV, prolonged use of your
Internet Terminal may degrade your
projection TV's picture tube, by causing
an imprinted image to remain on the
screen.
If yon ehoose this setup, use the remote
control that came with your TV to set the
video inpul, when viewing WebTV, to
S-VlDEO IN.
Internet Terminal
1
Connect the AUDIO jacks on the Internet Terminal to your TV's AUDIO
IN jacks, using the supplied A/V cable.
Do not connect the VIDEO A/V jack.
2
Use the supplied S-VIDEO cable to connect the S-VIDEO jacks from your
Internal Terminal to your TV.
3
Connect one end of the telephone line cable to the Internet Terminal's
TEL LINE jack. Connect the other end to your home's telephone outlet.
4
Connect one end of the AC power cord to the Internet Terminal's AC IN
jack. Connect the plug end to an AC outlet.
Only use the supplied AC power cord.
Chapter 2: Connecting Your System
7