Connecting to a tv or a vcr with rca jacks, Caution – Sony INT-W100 User Manual
Page 8
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Connecting to a TV or a VCR
with RCA jacks
Internet Terminal
Caution
If you connect your internet Terminal to
a projection TV, prolonged use of your
Internet Terminal may degrade your
projection TV's picture tube, by causing
an imprinted image to remain on the
screen.
If you choose this setup, use the remote
control to set the video input, lohen
viewing W ebTV to VIDEO IN.
If you connect through i/our VCR, the
VCR must be turned on with the
external input selected, when you arc
connected to the Internet.
jacks on your VCR or TV, matching like colors. If there is only one audio
jack, connect the white plugs.
Connect one end of the telephone line cable to the Internet Terminal's
TEL LINE jack. Connect the other end to your home's telephone outlet.
Connect one end of the AC power cord to the Internet Terminal's AC IN
jack. Connect the other end to an AC outlet.
Only use the supplied AC power cord.
If connecting through your VCR, connect the VCR's A/V OUT jacks to
the TV's A/V IN jacks. If you use a coaxial cable for this connection,
connect the OUT jack on your VCR to the VHF/UHF jack on vour TV.
8
Chapter 2; Connecting Your System