Locating a specific track or a point in a track, Note, Locating a specific track or a poinf in a track – Sony CDP-CX300 User Manual
Page 16: Cdp-cx333es only)
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Playing CDs
Locating a Specific Track or a
Point in a Track
You can quickly locate any track while playing a disc
by using the KM AMS E»ll (AMS: Automatic Music
Sensor) dial or by using the /►►! buttons on the
remote. You can also locate a specific point in a track
while playing a disc.
KMAMS OCH
To locate
You need to
the next or
succeeding tracks
Turn the D« AMS »0 dial
clockwise until you find the track
the current or
preceding tracks
Turn the KM AMS t»D dial
counterclockwise until you find the
track
a specific track
directly UJ
The number button of the track on the
remote. When you directly locate a
track numbered over 10, press >10
first, then the corresponding number
buttons.
a point in a track
while monitoring the
sound d
(backward)/ ►► (forward) on the
remote and hold down until you find
the point
a point in a track
quickly by observing
the display ^
(backward)/ ►► (forward) on the
remote and hold down until you find
the point during pause. You will not
hear the sound during the operation.
Customising the Sound of Your
Music (Digital Filter Function)
(CDP-CX333ES only)
By selecting the type of filter you want, you can adjust
the sound to match your system, your speakers, etc.
This player has two types of filters.
FILTER
Types of Digital Filter
Sound image
STD (Standard)
• wide ranging
• ample spatial representation
1 (Clear)
• clear
• smooth sound reproduction
2 (Plain)
• high clarity
• strength
Set the FILTER control to the digital filter type you
want. The display shows the digital filter type you
select.
If you change the type of digital filter during play, the
sound will be interrupted momentarily.
Note
The Digital Filter function primarily changes characteristics
outside the audible frequency. They cannot affect changes
within the audible frequency such as those provided by the
tone controls of the amplifier. Therefore, with certain
combinations of hardware and software, there may be no
noticeable effect after switching the filter.
Note
If OVER appears in the display, the disc has reached the
end while you were pressing Turn the IKM AMS »{
dial counterclockwise or press to go back.
16