Sony CDP-CX300 - Manual (Page 27)

storing Information About CDs (Custom Files)
'Ç' If you have made a mistake while inputting the
character(s)
To correct the character which has been input
I Press or until the cursor moves next to the
incorrect character.
ALL DISCS
CDI
DISC 1
SGNYHEX5
AB
^ress DEL to delete the incorrect character.
ALL DISCS
DISC j
SONYHXXS
AB
[nput the correct character.
ALL DISCS
CD1
DISC j
sonyh
;
i
;
ts
AB
To correct the character currently being input
1 Press DEL to delete the incorrect character.
2 Input the correct character.
To insert a character between the input characters
Press or until the cursor moves next to the
point you want to insert, and enter the character.
'1^' You can label discs of the second CD player
See "Labeling discs of the second CD player" on page 22.
Storing Custom File
Information Using a Keyboard
You can store the Disc Memo for one disc sequentially
using an IBM-compatible PC keyboard* (not supplied).
* Power consumption must be 120 mA or less.
Keyboard jack
1 Connect a keyboard to the keyboard jack on the
front panel of the player.
rrr-T»nnn^^frrry
—I O o o o o
o o o o o
«3 o o o o e
-♦o
2 After selecting the disc you want on the player,
press the Enter key.
3 Input the characters you want, then press the Enter
key to store the information.
'Q'You can delete all characters of selected item
while holding down the Shiftjcey, press the Delete key.
Notes
• If the cursor keys do not work correctly and you cannot
complete the task using the keyboard, disconnect the
keyboard then recormect it to the player and try again.
• If the keyboard is not the USA model, the characters may be
input differently from those on the keys.
The USA keyboard layout is shown below.
D
(ï3mQQQQQQgQED
27