Sony CDP-CX300 - Manual (Page 25)

storing Information About CDs (Custom Files)
Turn the JOG dial until the desired character
appears in the display.
The cursor disappears and the first space for the
Disc Memo flashes.
As you turn the JOG dial clockwise, the characters
appear in the following order. Turn the JOG dial
counterclockwise to go in reverse order.
(space) A B C D E F G H I J K L M N O P Q R S T U
V W X Y Z a b c d e f g h i j k l m n o p q r s t u v w
x y z 0 1 2 3 4 5 6 7 8 9 ! ’ ' # $ % & ' ( ) * + , - . / : ; <
= > ? @
Changing the Disc Memo
1 Follow Steps 1 to 3 in "Labeling discs on the
player" on page 24 to select the Disc Memo you
want to change.
2 Turn the KKI AMS OCH dial to move the cursor to
the position you want to change.
When the cursor position is on a character, the
character flashes but when the cursor position is
on a blank space, the cursor (
l - j ) appears in the
display.
AB
-'S-
/T\
Push the JOG dial to select the character.
The selected character lights up, and the flashing
cursor appears to indicate the next space to be
input.
ALL DISCS
COi
AB
i DISC
s
-
To make a correction
Press CLEAR and begin again by inputting the correct
characters.
6 Repeat Steps 4 and 5 to input more characters.
7 Press YES to store the Disc Memo.
The display shows the Disc Memo.
2 0
S O N Y H I T S
Repeat Steps 1 to 7 to assign Disc Memos to other
discs.
'(j' To change the character type quickly while input
characters
Press TIME/TEXT in step 4 above. The character on the
cursor changes to the first character of each character
type.
Each time you press TIME/TEXT, the character type
changes as follows;
•
0
-
(space)
To change characters
Turn the JOG dial until the desired character appears in
the display.
To add characters
Push the JOG dial. The new blank space appears next to
the selected character, then turn the JOG dial until the
desired character appears in the display.
To erase characters
Press CLEAR. The selected character disappears.
To erase all characters for the current Disc Memo
Press and hold CLEAR for few seconds.
All input characters for the current Disc Memo are
erased.
3 Repeat step 2 to change more characters.
4 Press YES to store the Disc Memo.
Erasing the Disc Memo
1 Follow Steps 1 to 3 in "Labeling discs on the
player" on page 24 to select-the Disc Memo you
want to erase.
2 Press and hold CLEAR for few seconds.
3 Press YES.
The Disc Memo disappears.
25