Connecting an audio system – Sony KV-32XBR45 User Manual
Page 10
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Connecting two VCRs for tape editing using MONITOR OUT
MONITOR OUT allows you to record a program that is
on the screen.
(Rear of TV)
to video
input
to audio
input
to audio
output
VMC-810/S820S
(not supplied)
The above type of connection should only be used
when you connect from the line input of one VCR, and
from the line output of a second VCR.
Notes
• Do not change the input signal while editing through
MONITOR OUT, or the output signal will also change.
• When connecting a single VCR to the TV, do not connect the
MONITOR OUT jacks at the rear of the TV. to the VCR's line
input, while at the same time connecting from the TV's VIDEO
IN jacks to the VCR's line output, as shown above.
• You can use the S video jack to connect a VCR for playback
and the AUDIO/VIDEO jack to connect a VCR for recording.
VMC-810/S820S
(not supplied)
(Rear of the TV)
Connecting an audio system
When connecting audio equipment, see page
24
and
25
for more information.
10 I Gett ng Started