Auto cable input select function, To reset the auto cable input select setting, Set the cable box/tv selector to cable box – Sony KV-32XBR45 User Manual
Page 39
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Auto cable input select function
This remote control also features a function that will
switch automatically to your cable box TV input
channel when you turn on the TV or cable box.
You can select 2-6 channels or VIDEO 1 depending on
your cable box. For example, you can set the TV's
channel to 3 whenever you turn the cable box on as
follows:
POWER (TV)
CODE SET
TV
2-6
buttons
ENTER
To reset the auto cable input select setting
While pressing CODE SET, press POWER (CABLE)
and ENTER.
+
Notes
• In some cases, your cable box may use a code that is not
provided with this remote control and you may not be able to
operate your cable box with the supplied remote control.
• When you remove the battery from the remote control, the
setting may be erased. Make the setting again each time you
replace the battery, if necessary.
• If your TV's AC cord is plugged in to the cable box's switch
outlet, it may effect the proper operation of this function.
CABLE BOX/TV
selector
Set the CABLE BOX/TV selector to CABLE
BOX.
CABLE BOX. .TV
2 While pressing CODE SET, press POWER
(CABLE), TV, 3 and ENTER.
ENTER
+
.-POWER TV
(
cable
'
If you are viewing VIDEO 1 for cable TV, you can set as
follows:
While pressing CODE SET, press POWER
(CABLE), TV/VIDEO and ENTER.
(gODESET[(
+
POWER TV/VIDEO
ENTER
Operations 39