Presetting channels, Step 5: changing the menu language – Sony KV-32XBR45 User Manual
Page 16
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Presetting channels
You can preset TV channels easily by using the AUTO
PROGRAM feature. Preset channels during the day
rather than late at night, since some channels go off the
air and will not be preset.
You do not have to do this procedure if you execute
AUTO SET UP (page 1 4 ) . Do this procedure only
when you want to set channels manually.
1
Press MENU.
2 Press + ♦ or - ♦ to move the cursor (►) to
SET UP and press RETURN.
ŒSO
(
return
I (
©SET UP
►CHANNEL ERASE/ADD
CHANNEL CAPTION
CHANNEL GUIDE
VIDEO LABEL
GABLE. ON
AUTO PROGRAM
LANGUAGE:ENGLISH
:5MENU
Use iJU MIHMJ Ex i t !&
3
Press + ♦ or - ♦ to move the cursor (►) to
AUTO PROGRAM and press RETURN.
c+^O
c ~ ^
(
ret
U^C
“AUTO PROGRAM" appears on the screen and the TV
starts scanning and presetting channels automatically.
When all the receivable channels are stored, “AUTO
PROGRAM" disappears and the lowest numbered
channel is displayed.
4
Press MENU to return to the original screen.
Notes
• If you are in one of the video modes, the AUTO PROGItAM
lettering will be black on the menu. To display the AUTO
PROGRAM lettering you must press the TV/VIDEO or TV
button until a channel number appears.
• In case of using the AUX connector, AUTO PROGRAM is also
available for the AUX input. Press the TV button on the remote
commander first and make sure that "AUX" is displayed
beside the channel number on the screen. Then follow steps 1
to 3 above.
Step 5: Changing
the menu
language
If you prefer Spanish or French to English, you can change
the menu language. You do not have to do this procedure
if you execute AUTO SET UP (page
14).
Do this procedure
only when you want to set it manually.
MENU
RETURN
1
Press MENU.
2
Press +
♦
or -
♦
to move the cursor (►) to SET UP
and press RETURN.
3
Press + ♦ or - ♦ to move the cursor (►) to
LANGUAGE and press RETURN.
© SET UP
CHANNEL ERASE/ADD
CHANNEL CAPTION
CHANNEL GUIDE
VIDEO LABEL
CABLE:
ON
AUTO PROGRAM
►LANGUAGE:ENGLISH
DMENU
Use bh MWÜ
I t lEMUl
4
Press + ♦ or - ♦ to select ESPAÑOL or FRANÇAIS
and press RETURN.
Œ5DO
Œ5
© AJUSTES
BORRAR/AÑADI R CANAL
NONBRE DEL CANAL
CANAL GUIA
ETIQUETA DE VIDEO
CABLE:
SI
AUTO PROGRAMACION
►LENGUAJE: ESPAÑOL
:>MÊNU
Usar
!
TOU)
Sal
L®.
5
Press MENU to return to the original screen.
Note
• Certain parts of the ESPAÑOL and FRANÇAIS menus remain
in English.
16
Getting Started