Installing the glass, Adjusting the shelf – Sony KV-32XBR45 User Manual
Page 13
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
step 3: Installing the
glass door and
adjusting the shelf
■ KV-32XBR8S only
Follow these instructions to install the glass door and
adjust the shelf.
Installing the glass
1
Attach the top hinge, with the screws
facing the front of the TV, to the right side
of the glass door, tighten the screws snugly,
but do not overtighten. Attach the plate pad
to the left side and push the plate over the
plate pad.
cj
I
2
Insert the bottom hinge into the bushing
located at the bottom, right side of the
cabinet.
The tip of the screw
, should not project.
/
3
Push the top, glass door hinge into the top,
right bushing and gently slide the glass door
into the bottom hinge. Adjust the glass door
until level, and tighten the hinge screws.
Note
• The glass door in this stand is made of tempered glass.
Although it is more shock-resistant than ordinary glass,
tempered glass may shatter if it is dropped or receives a
sudden shock.
Adjusting the shelf
1
Unlock the four shelf supports with a
medium Phillips head screwdriver. Turn the
screwdriver 90° to unlock the shelf
supports.
t
2
Gently slide the shelf up and out.
3
Insert shelf supports in the appropriate
holes. Slide shelf in, align the shelf grooves
with the shelf supports, and slide the shelf
down.
Getting Started
13