Connecting a satellite receiver, Sat) and a vcr, Note – Sony KP-48V80 User Manual

Page 12

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Installing and Connecting the Projection TV (continued)

Disconnect all power sources before making any connections.

Connecting a satellite receiver

(SAT) and a VCR
1

Connect tlio cable from the satellite

antenna to the satellite receiver.

2

Attach the coaxial cable from the

incoming cable connection or antenna to
VHF/UHF IN on the VCR.

3 Using a coaxial cable, connect VHF/UHF

OUT on the VCR to VHF/UHF on the
projection TV.

4

Using AUDIO and S VIDEO* cables,

connect AUDIO and S VIDEO OUT on the
satellite receiver to AUDIO and S VIDEO

IN on the VCR.

5

Using AUDIO and S VIDEO* cables,

connect AUDIO and S VIDEO OUT on the
VCR to AUDIO and S VIDEO IN on the
projection TV (White-AUDIO Left, Red-
AUDIO Right).

* If your VCR is not equipped with S VIDEO, use a

VIDEO cable (yellow) instead of the S VIDEO
cable.

Note;

• To view input from the satellite receiver or

VCR, select the video input which your
satellite receiver or VCR is connected to
by pressing TV/VIDEO on the remote
control.

8

(Rear of projection TV)

S VIDEO

Advertising
This manual is related to the following products: