Note, Adjusting the convergence automatically, Flasfi focus) – Sony KP-48V80 User Manual
Page 24: Basic set up (continued)
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Basic Set Up (continued)
To perform AUTO SET UP again
RASKTOCUSTViVlOeO
o o o o o
□ Q
SETUP iiKNu ^ ;
Press SET UP inside the drop-down panel on
the projection TV and perform steps 2-4 on
page 19.
Press SET UP again to exit.
Adjusting the Convergence
Automatically (FLASH FOCUS)
The projection tube image appears on the
screen in three layers (red, green and blue). If
they do not converge, the color is poor and
the picture blurs.
Before you use your projection TV, be sure to
adjust the convergence.
The PLASH FOCUS feature allows you to
adjust the convergence automatically.
Tips V
•
It is recommended to perform FLASH FOCUS about
30 minutes after the projection TV is first turned
on.
•
You can also perform FLASH FOCUS using the Set
Up menu on page 39.
Press FLASH FOCUS.
FLASH FOCUS
The cross pattern appears and FLASH
FOCUS begins to work. The adjustment is
completed when the cross pattern becomes
white.
Note:
• FLASH FOCUS is canceled if you
perform any other function while FLASH
FOCUS is working.
20