Connecting a dtv (digital, Television) receiver – Sony KP-48V80 User Manual
Page 13
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Connecting a DTV (digital
television) receiver
Before connecting, be sure to read the
Operating Instructions of the DTV receiver.
1
Attach the coaxial cable from the roof
antenna to VHF/UHF on the DTV
receiver.
2
Using three yellow VIDEO cables,
connect Y,
P
b
and
P
r
of VIDEO OUT on
the DTV receiver to Y,
P
b
and
P
r
of
VIDEO 4 or 5 IN on the projection TV.
3
Using an AUDIO cable, connect AUDIO
OUT on the DTV receiver to AUDIO of
VIDEO 4 or 5 IN on the projection TV
(White-AUDIO Left, Red-AUDIO Right).
4
Set the DOWN CONVERTER ON/OFF
switch on the DTV receiver to ON.
Disconnect all power sources before making any connections.