Using the s-link function with a, Sony av receiver – Sony KP-48V80 User Manual
Page 21
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Using the S-Link function with a
Sony AV receiver
1
Using a VIDEO cable, connect VIDEO 1
IN on the projection TV to MONITOR
OUT on the Sony AV receiver.
2
Using an AUDIO/VIDEO cable, connect
TV OUT on the projection TV to TV
AUDIO and VIDEO IN on the AV
receiver.
3
Using an S-LINK cable, connect S-LINK
on the VIDEO 1 IN panel on the
projection TV and S-LINK on MONITOR
OUT on the AV receiver.
4
Using an S-LINK cable, connect S-LINK
on the TV OUT panel on the projection
TV to S-LINK on TV IN on the AV
receiver.
5
Using AUDIO/VIDEO and S-LINK
cables, connect the Sony video equipment
to the AV receiver.
6
Use the Audio menu to set "Speaker" to
"Off" or "Center." (see "Speaker" on
page 32)
7
Press CH (CHANNEL)+/-to activate
the S-Link function.
Disconnect all power sources before making any connections.
(Rear of projection TV)
S-LINK
Audio/
video
outputs
Refer also to the Operating
Instructions supplied with the VCR,
satellite receiver, DVD player, LD
player and other Sony video
equipment for details.
TV OUT
2 , 4
Video cable
(not supplied)
MONITOR OUT
(video output)
RK-G34, etc.
S-LINK (not supplied)
MONITOR
OUT
S-LINK
VCR 2
Audio/
video
outputs
Audio/video/
S-Link cable (not
supplied)
S-LINK
VIDEO 1 IN
(S-LINK, video/
audio inputs)
■ Audio/video/
S-Link cable
(not supplied)
TV IN
(S-LINK,
video/
audio inputs)
Sony AV receiver
VIDEO 2 IN (S-LINK,
video/audio inputs)
17