Connecting two vcrs for tape editing, Notes – Sony KP-48V80 User Manual

Page 15

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Connecting two VCRs for tape
editing

By connecting a second VCR to MONITOR

OUT, you can record a program being played
by the primary VCR to the second VCR or
perform tape editing and dubbing.

1

Connect the VCR intended for playback

using the connection instructions on page
6 of this manual.

2

Using an AUDIO/VIDEO cable, connect

AUDIO and VIDEO IN on the VCR
intended for recording to AUDIO and
VIDEO OUT of MONITOR OUT on the
projection TV.

Notes:

• Do not change the input signal while

editing through MONITOR OUT.

• When connecting a single VCR to the

projection TV: if VCR LINE OUT is
connected to VIDEO IN on the projection
TV, do not connect MONITOR OUT on
the projection TV to the VCR LINE
INPUT (see right). Doing so will cause
program interference and other viewing
problems.

Disconnect all power sources before making any connections.

(Rear of projection TV)

(Rear of projectionTV)

Indicates

direction

of signal

11

Advertising
This manual is related to the following products: