Sony SLV-798HF - Manual (Page 14)

© rhc AL IX'i I'KI-SM
sl .1 rls. AUTO PRf SET
PROCESSING
SET UP rs do
Normal display
Hookup 2: VCR Plus-t- channel setup
1
Press MENU and select SET VCR Plus+
CHANNELS. TIMER SET/CHECK
TUNER PRESET
CLOCK SET
LANGUAGE
CABLE BOX CONTROL
ADVANCED OPTIONS
Use to se I ec I_________ an
i t em. t hen posh (OKl
Z Push the joystick to to select AUTO
and press the joystick (OK).
3
Press POWER to turn off the VCR.
SMART CHANNEL MAPPING
I AUTO jMANUAL j
Use I»■»! to s e l e c t
Then push jo^
Push I m ENUI to q u i t
The VCR receives the program information signal from 0:00 am to 5:00 am
while the VCR is turned off, and set up the channel for VCR Plus+ recording.
After channel setup is finished, you can record TV programs using VCR
Plus+. For details, see page 48.
Notes
• It takes about 1 hour to complete channel setup.
• The VCR can receive the program information signal only while the VCR is turned
off and no timer recordings are set.
• If the channels in your area don't carry the program information signals, set the
program guide channels manually. For details, see page 50.
• If the Choose your Cable CH MAP menu appears the first time you turn on the
VCR after finishing channel setup, select the MAP number. For details, see page 49.
Automatic clock setting
Once you've set up the VCR, it automatically sets the clock the first time you
turn off the VCR. After that, whenever you turn off the VCR, it checks the
time and adjusts the clock, even for Daylight Saving Time. The VCR sets the
clock by picking up a time signal provided by some TV channels.
If you wanf to use the timer to record right away, or if the channels in your
area do not carry time signals, set the clock manually. For details, see page
36.
continued
Getting Started [ 15