Notes – Sony SLV-798HF User Manual
Page 65
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Setting the timer manually (continued)
Daily/weekly recording
In step 2 above, push the joystick to ♦ to select the recording pattern. Each
time you push the joystick to the indication changes as shown below.
Push the joystick to T to change the indication in reverse order.
the current date —► SUN-SAT —► MON-SAT —► MON-FRI —► EVERY SAT...........
—► EVERY MON —► EVERY SUN —► 1 month later —* (date counts down) —»
the current date
Tips
• To set the channel, you can also use the CH
+1
- o r
number buttons.
• You can set the channel with the shuttle ring during stop.
• To set the tape speed, you can also use the SP / EP button.
• When you are recording a program in the SP mode and the remaining tape becomes
shorter than the recording time, the tape speed is automatically changed to the EP
mode. Note that some noises will appear on the picture when the tape speed is
changed. If you want to keep the tape speed, set AUTO TAPE SPEED to OFF in the
ADVANCED OPTIONS menu (page 80).
• To lock the VCR after setting the timer, see page 61.
Notes
• If you are using cable box control, you cannot select "LI" or "L2."
• The station ID appears on the TV screen only when you complete Smart Channel
Mapping and the VCR receives the program information signal (see page 48).
i4
Basic Operations