Sony SLV-798HF - Manual (Page 50)

If the program information signal in \ our
area has so\ eral channel map patterns, the
Choose vour Cable CH MAP menu
appears, and you must select the channel
map. See "To select the channel map" on
this page.
CNN
MTV
14---
WNET 35 ---------------
Use 1»^! to select
Then push joR]
Push [
menu ! 1 0 quit
• POWER
О
Press POWER to turn off the VCR.
The VCR sets the program guide channels
from 0:00 am to 5:00 am while the VCR is
turned off. (It takes about 1 hour to
complete channel mapping.)
•
MAP Ml 2 3 4 5 R 7 ftl
HKABC!
KCBS
КАЁТ
WNET
Use t 0
Then push
Push I m ENL
^ CNN 98
4 MTV 55
■ 5------
select
M
to quit
Channel map
To select the channel map
If the program information signal in your area
has several channel map patterns (up to 8), the
Choose your Cable CH MAP menu appears:
• the first time you turn on the VCR after
completing channel mapping
• after selecting AUTO and pressing the
joystick (OK) on the SMART CHANNEL
MAPPING menu
In this case, you have to select the channel map on the Choose your Cable
CH MAP menu.
1
Find the VCR Plus+ Channel Listing in your program guide. For
details, see page 47.
2
Push the joystick to ^ ^ to select the channel map number you want
by checking the channel number in the program guide.
3
Press the joystick (OK).
Channel number
Notes
• It takes about 1 hour to complete channel mapping.
• The VCR can receive the program information signal only while the VCR is turned
off and no timer recordings are set.
• The VCR cannot set the guide channels correctly unless you enter the ZIP/POSTAL
CODE in your area.
* • When "you move to a different area, you must set up the VCR again and enter your
new ZIP/POSTAL CODE in the EASY SET UP procedure.
continued
Getting Started 49