Uick reference to using the vcr, Hookup 1, Hookup 2 – Sony SLV-798HF User Manual
Page 94: Hookup 3, Hookup 4
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
0
uick reference to using the VCR
Hookup 1
To play a tape
1
Set the I
\'
to channel 3 or
4
(or to video input, if
\'OU
made A/\ connections.)
2
Insert a tape and press the
joN'stick t>.
To record a program
1
Turn on the cable box.
2
Press VCR Plus+ on the
remote commander.
3
Enter the program's
PlusCode number.
4
Select ONCE, DAILY, or
WEEKLY, then press SET.
5
Insert a tape.
6
Press POWER to turn off
the VCR.
7
Leave the cable box on.
To watch TV
1
Turn off vour VCR, or
press the VCR's TV/
VIDEO button until the
VIDEO indicator in the
display winc4ow goes off.
2
Turn on your cable box.
3
Set the TV to the cable box
output channel (usually 2,
3, or 4).
4
Set the cable box to the
channel you want to
watch.
Hookup 2
To play a tape
1
If you made A/V
connections, set the TV to
video input.
If you didn't use A/V
hookup:
• Turn on the cable box.
• Set the cable box to
channel 3 or 4.
• Set the TV to the output
channel of the cable box
(usually 2, 3, or 4).
If you have anv questions abou
l-800-222-SO\Y (7669) or vxTiti-
#T1-11, Park Ridge, N| 07636
2
Insert a tape and press thi'
jovsllck O.
To record a program
1
Press VCR I’lus+ on the
remote commander.
2
Enter the program's
PlusCode number.
3
Select ONCE, DAILY, or
WEEKLY, then press SET.
4
Insert a tape.
5
Press POWER to turn off
the VCR.
To watch TV
1
Turn off your VCR, or
press the VCR's TV /
VIDEO button until the
VIDEO indicator in the
display winctow goes off.
2
Select the channel with
your cable box (if vou have
one) or with vour TV.
Hookup 3
To play a tape
1
Set the TV to channel 3 or
4 (or to video input, if you
• made A/V connections.)
2
Insert a tape and press the
joystick O. If there's no
picture on your TV, press
the VCR's TV/VIDEO
button until the VIDEO
indicator comes on in the
display window.
To record a program
1
Pre.ss VCR Plus+ on the
remote commander.
2
Enter the program's
PlusCode number.
3
Select ONCE, DAILY, or
WEEKLY, then press SET.
4
Insert a tape.
5
Press POWER to turn off
the VCR,
To watch TV
1
Turn off the \’CR, or press
the VCR's T\'/VIDEO
button until the VIDEC)
indicator in the displa\
\\ indow goes off.
2
Set the EV to the channel
vou want to r\’atcli.
Hookup 4
To play a tape
1
Set the TV to channel 3 or
4 (or to video input, if vou
made A/V connections.)
2
Insert a tape and press the
joystick O.
To record a program
1
Turn on the cable box.
2 Set the cable box to the
channel you want to
record.
3
Press VCR Plus+ on the
remote commander.
4
Enter the program's
PlusCode number.
5
Select ONCE, DAILY, or
WEEKLY, then press SET.
6
Insert a tape.
7
Press POWER to turn off
the VCR.
8
Leave the cable box on.
To watch TV
1
Turn off your VCR, or
press the VCR's TV /
VIDEO button until the
VIDEO indicator in the
display window goes off.
2 Turn on your cable box.
3
Setihe.TVdo the cable box
output channel (usuallv 2,
3, or 4).
4
Set the cabfe box to the
channel you want to
watch.
t this product, you may call:
Sony Customer Information Center
to:
Sony Customer Information Center
Sony Drive, Mail Drop
Sony Corporation Printed in Malaysia