Sony SLV-798HF - Manual (Page 24)

© I'liU'i- Wlur OSS ivccivor l \ k U' number ,ind pii>h
tbe unxiek lo 4- For detuil>, see p.ii;e e^'
O Set your DSS recoi\’er
output chcinnel (BOX
OUTPUT CH) to LINE
und press the joystick
(OK).
CABLE BOX CONTROL __
CABLE MOUSE )>rToFF
BOX CODE NO !650T
BsL>My.i!nattfeiilgilur~
CABLE BOX CONTROL
ggugm
CABLE MOUSE DN OFF
—1
BOX OUTPUT CH 5FS i
Enter vouf CABLE BOX
Code No using [0-9
keys
Re let to the Ope rat triQ
Manna 1 for the Code
■LINE
Use to select CABLE
BOX CH Then push ¡5<|
SET UP I S done
Normal display
Automatic clock setting
Once you've set up the VCR, it automatically sets the clock the first time you
turn off the VCR, After that, whenever you turn off the VCR, it checks the
time and adjusts the clock, even for Daylight Saving Time. The VCR sets the
clock by picking up a time signal provided by some TV channels.
If you want to use the timer to record right away, or if the channels in your
area do not carry time signals, set the clock manually. For details, see page
36.
Note
• To successfully record a program from the DSS receiver, proceed as follows:
- Leave the DSS receiver on all the time.
- Turn off the display (menu screen, channel number, etc.) of the DSS receiver.
- To record or receive locked channels, unlock the channel before the VCR starts
recording,
-To set pay-per-view programs in the timer setting, order the pay-per-view
program before the VCR starts recording.
- Some programs are copy protected. You cannot record these programs.
■ continued
Getting Started . 1 25-