Sony SLV-798HF - Manual (Page 81)

Editing with another VCR (continued)
Operation
(when recording on this VCR)
II PAUSE
Before you start editing
• Turn on vour T\' and sot it to the
\ idoo channel.
• Press INPUT SELECT to display "LI"
or "L2" in the display window.
• Press SP/ EP to select the tape speed, SP or EP.
• REC
1
Insert a source tape with its safety tab remox’od into the other
(playback) VCR. Search tor the point to start playback and set it to
playback pause.
2
Insert a tape with its safety tab in place into this (recording) VCR.
Search for the point to start recording and press
I I PAUSE.
3
Press # REC on this VCR and set it to recording pause.
4
To start editing, press the II PAUSE buttons on both VCRs at the same
time.
To stop editing
Press the ■ STOP buttons on both VCRs.
Tips
To edit more precisely, press the II PAUSE buttons on the VCRs to release pause.
• To cut out unwanted scenes while editing, pre.ss II PAUSE on this VCR when an
unwanted scene begins. When it ends, press II P.VUSE again to resume recording
(Assemble Editing).
Note
• If you start recording following the procedure aboee, the VCR won't start recording
with the APC function. To record a tape with the .\PC function, press 9 REC again
during recording pause in stepi 3 so that the VCR analyzes the tape. Then when you
start recording in step 4, press
II PAUSE immediately after the APC indicator stops
flashing. It you press II PAUSE before the APC indicator stops flashing, the APC
function is canceled.
82 Additional Operations