Setting up cable box control, Q 0í0id – Sony SLV-798HF User Manual
Page 37
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Setting up cable
box control
(Skip this section if you are
using Hookup 2, 3, 4, or 6.)
u ^
a Q
i
Your VCR includes a cable box control
feature that allows the VCR to control
most brands of cable boxes/DSS
receivers via the Cable Mouse. With
cable box control, the VCR controls
channels on the cable box/DSS receiver
for timer recording. You can also use the
VCR's remote commander to change
cliannels on the cable box/DSS receiver
whenever the cable box/DSS receiver is
turned oil even if fhe VCR is turned off.
To use cable box control, you need to
connect the Cable Mouse (pages 10 and
23) and set the code number and output
channel.
This VCR is programmed with codes necessary to control channel
selection on most brands of cable boxes at the time this VCR was
manufactured. It is possible that new cable boxes may be introduced
that cannot be controlled with this VCR's Cable Mouse. If you have a
cable box that is incompatible with this VCR, contact your cable
operator — they may be able to provide you with a compatible cable
box.
( 1 ( 1
Q
CD
CCD
0
'0
’0
0
'0
'0
0 ’© ’0
Q 0Í0ID
Number
buttons
- CH +/-
MENU
Joystick
OK
1
MENU Press MENU, then push the joystick to
■^ / to move the cursor to CABLE BOX
CONTROL and press the joystick (OK).
When using the EASY SET UP procedure,
skip this step.
iON [OFF'
Use
to
select
Push iMENli] to qu (
Push the joystick to •^/^ to select ON,
then push the joystick to
CABLE MOUSE
ON lOFF I
SOXCOOE^O. '■■■/■(
---- 1
I BOX OUTPUT CH
CH3 I
Enter your CABLE BOX
Code No. using |0-9| keys
Refer to the Operating
Manua I for the Code
38
Getting Started