Assigning names to a disc - disc memo – Sony CDP-C910 User Manual
Page 22
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Assigning Names to a Disc - Disc Memo
[1] Using the
buttons
^
I^ I «n
&
_4
n
----------------------
Press ◄◄ or ►► until the desired letter
appears.
Example; if ►► is pressed 7 times, F appears.
2
When the desired letter appears, press
&
Move the cursor to select
the next letter.
Repeat steps [§ -1 and [B] -2.
Lights up.
b S c s ® @ ® ® ® ® ® ® ® ®
1
3 4 s l
«
bi
1 2
After about 1 second, the memo you have written
will be displayed.
Each time the disc is put in the unit, the memo will
be displayed.
Note
Symbols cannot be entered with the letter buttons on the remote
commander. To enter symbols, use
buttons.
22
Advertising