9set the desired output level to a disc .evel file, To preset a new level on to the current level file, Clearing the level file – Sony CDP-C910 User Manual
Page 25: Set the desired output level to a disc .evel file
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
9
set the desired Output Level to a Disc
.evel File
Adjust the level. You can also use LINE OUT
LEVEL buttons on the remote commander.
ts up
Using the level file function, you can preset the desired
output level for each disc. When a disc with the level file
is played, the PHONE LEVEL/LINE OUT LEVEL control on
the front panel is automatically adjusted to the preset
level.
When you use the level file function, use headphones or
the amplifier connected to the variable line output jacks.
This function does not work for the output level of the
fixed line output and optical digital output jacks.
To preset a new level on to the current level file
Repeat steps 3 and 4.
Clearing the Level File
Load the magazine with the disc that has the level file
you want to clear. Insert the magazine and choose that
disc with the DISC selectors or the DISC SKIP button.
Press LEVEL FILE. “LEVEL FILE” appears in the
display.
Press ERASE while the “LEVEL FILE” is displayed.
“FILE ERASE” is displayed and “CF LEVEL” goes off
from the display window. The level file setting is cleared.
25