Sony KV-32XBR48 - Manual (Page 15)

Using the Console Box
(KV-35XBR88 only)
The console box features electronic sliding
doors and three AC outlets.
The AUTO ACCESS switch on the front of the
console controls operation of the sliding
doors.
[ v>K<o:v
Q№«/a.OSC
AC outlets
Your TV cord has been designed to connect to
one of the AC outlets on the rear of the
console. You will have two additional outlets
to connect accessory equipment to.
CAUTION
• Do not connect the console AC power cord
to a wall outlet until you have completed
making all connections.
• Do not connect equipment with a combined
wattage of more than 300 W/3 A to the
console outlet (the wattage of this TV set is
198 W).
Operating your console box
automatically (AUTO ACCESS ON)
When the AUTO ACCESS switch is set to ON,
the doors will operate automatically. Whenever
the sensor detects movement within its range,
the doors will open and remain open until the
range is clear.
Refer to the following diagram to determine
the range of the automatic feature,
approx.
outlet
People with small children and pets
should consider using the manual feature
to avoid possible injury and/or damage.
• The ultrasonic sensor may detect movemenl
drafts, vibrations, sound waves, or electroni.
signals that will cause the doors to open
inadvertently.
• If the travel of the doors is interrupted, they
will reopen automatically and remain
opened. When you want to close the doors
again, press the OPEN/CLOSE button (or
set the AUTO ACCESS switch to OFF).
Operating your console box
manually (AUTO ACCESS OFF)
When the AUTO ACCESS switch is set to
OFF, the doors will operate manually.
Pressing on the OPEN/CLOSE button will
cause the doors to open or close and remain ir
that position until the switch is pressed again.
13