Sony KV-32XBR48 - Manual (Page 5)

Cable or antenna
Most simple connection. Connection is made
directly from the cable or antenna to the TV.
Cable
(Rear of TV)-
VHF/UHF
Cable and antenna
You may find it convenient to use the
following set up if your cable provider does
not feature local channels that you are able to
receive using an antenna.
CATV cable
(No connection "TO
CONVERTER" in this case)
(Rear of TV)
AUX
Antenna cable
TO CONVERTER
VHF/UHF
Select Cable or ANT mode by pressing ANT on
the remote control.
Connecting a cable box
Some pay cable TV systems use scrambled or
encoded signals that require a cable box* to
view all channels.
(Rear of TV)
VHF/UHF
Cable
1
Í
IN OUT
*Cable box
Note:
• If you will be controlling all channel
selection through your cable box, you
should consider using the CHANNEL FIX
feature, (see "CHANNEL SET UP" on
page 26)
Cable box and cable
Some pay cable TV systems use scrambled or
encoded signals requiring a cable box* only for
certain channels (e.g. HBO, SHOWTIME, etc.).
"Cable box
scrambled
channels
(Rear of TV)
AUX
TO CONVERTER
"*“CD=f
75-ohm coaxial
cable (not supplied)
I
(signal)
CATV cable
(unscrambled channels)
VHF/UHF
For this set up, you can switch between scrambled
channels (through your cable box), and normal
(CATV) channels by pressing ANT on your
remote control.
Notes:
• You may be able to program your Sony
remote control to operate your cable box.
(see "Operating a Cable Box or DBS
Receiver" on page 34)
• During PIP, P&P, CHANNEL INDEX or
FAVORITE CHANNEL viewing, the AUX
input can only be viewed in the main picture.
• If you are connecting a cable box through the
AUX input and would like to switch between
the AUX and normal (CATV) input you
should consider using CHANNEL FIX.
(see "CHANNEL SET UP" on page 26)