Sony KV-32XBR48 - Manual (Page 28)

JK Adjusting your SET UP (menus) (continued)
@ Using the SET UP Menu
(m) SET UP
► CHANNEL SET UP
FAVORITE CHANNEL
V»DEO LABEL
CUSTOMIZED MENU
LANGUAGE : ENGLISH
TILT CORRECTION : 0
OMENU
Use 01 0 Exit
For detailed information on using the remote
control to modify menu settings, refer to
“Learning Menu Selection" on page 22.
To select the SET UP 3 menu:
Display Select
If any menu items are "grayed out", press the
ANT button on your remote control so that a
channel number appears.
26
CHANNEL
SET UP
Basic set up options
for viewing
CHANNEL SET UP
CABLE ON
CHANNEL FIX OFF
AUTO PPOGRAM
CHANNEL ERASE■ADD
CHANNEL CAPTION
OMENU
With the CHANNEL SET UP window open:
1 Use the joystick to select the feature you want to change.
2 Press © to access the feature.
CABLE: Select ON it your TV is connected to a cable system.
(AUTO SET UP will set CABLE to OFF automatically if a
cable channel is not available)
CHANNEL FIX: Press up or down on the joystick to set the TV’s input to one of the
following options:
2-6: When the cable box is connected to the VHF/UHF input and you do not want to switch
to AUX mode. Press DBS/CABLE (FUNCTION) and then CH +/- to change channels.
AUX 2-6: When a cable box is connected to AUX and a cable or antenna is connected to
VHF/UHF. You can alternate between the two inputs by pressing ANT.
VIDE01: When you have connected video equipment (e.g. AV receiver) and you want the
TV input fixed to it. You will be able to alternate between video sources.
OFF: When you want to switch CHANNEL FIX off.
If the TV is in the AUX mode when you turn CHANNEL FIX off, press ANT to return to
regular (CATV) mode.
TIMER and CHANNEL BLOCK settings are erased when CHANNEL FIX is set.
AUTO PROGRAM: Signals the TV to automatically program all receivable channels.
CHANNEL ERASE/ADD: With the CHANNEL ERASE/ADD window open:
1 Place the cursor next to ERASE or ADD.
2 Select the desired channel using CH+/-, or by selecting with
the 0-9 buttons and pressing ENTER.
3 Press © .
CHANNEL ERASE'ADD
► ERASE
ADO
2MENU
33
Use(0-9]Or|CH.'-)
10 seleci the channel
use e: Q F
CHANNEL CAPTION
CHANNEL CAPTION: With the CHANNEL CAPTION window open:
1 Press © and then press up or down on the joystick to
select the desired channel, and press @ again.
2 Press up or down on the joystick to display the first letter or
number of the caption and press © to select it. (Repeat
until up to four digits are selected)
3 Press © . To erase a Caption, press RESET._______________