Connecting and installing the tv (continued), Connecting an antenna/cable tv, System with a vcr – Sony KV-32XBR48 User Manual
Page 6: Connecting to an s video equipped vcr
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Connecting and Installing the TV (continued)
Disconnect all power sources before making any connections.
(Rear of TV)
Connecting an antenna/cable TV
system with a VCR
1
Attach the coaxial connector from your
cable or antenna to IN on your VCR.
2
Using AUDIO/VIDEO connectors, connect
AUDIO and VIDEO OUT on your VCR to
AUDIO and VIDEO IN on your TV
(Yellow-VIDEO, White-AUDIO Left, Red-
AUDIO Right).
3
Using a coaxial connector, connect OUT on
your VCR to VHF/UHF on your TV.
Connecting to an S Video equipped
VCR
1
Attach the coaxial connector from your
cable or antenna to IN on your VCR.
2
Using AUDIO connectors, connect AUDIO
OUT on your VCR to AUDIO IN on your TV
(White-AUDIO Left, Red-AUDIO Right).
3
Using a coaxial connector, connect OUT on
your VCR to VHF/UHF on your TV.
4
Using an S VIDEO connector, connect
S VIDEO on your VCR to S VIDEO on
your TV.
Note:
• If you are connecting a monaural VCR,
connect only the single audio output to the
left (MONO) input on your TV.