Connecting and installing the tv (continued), Note – Sony KV-32XBR48 User Manual
Page 8
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Connecting and Installing the TV (continued)
Disconnect all power sources before making any connection:
(Rear of TV)
Connecting a DBS (Direct Broadcast
Satellite) receiver
1
Connect the cable from your satellite antenna
to your DBS receiver.
2
Attach the coaxial connector from your cable or
antenna to VHF/UHF on your TV.
3
Using AUDIO/VIDEO connectors, connect
AUDIO and VIDEO OUT on your DBS receiver
to AUDIO and VIDEO IN on your TV.
Connecting a DBS (Direct Broadcast
Satellite) receiver and a VCR
1
Connect the cable from your satellite antenna
to your DBS receiver.
2
Attach the coaxial connector from your cable or
antenna to VHF/UHF IN on your VCR.
3
Using a coaxial connector, connect VHF/UHF
OUT on your VCR to VHF/UHF on your TV.
4
Using AUDIO/VIDEO connectors, coimect
AUDIO and VIDEO OUT on your DBS receiver to
AUDIO and VIDEO IN on your VCR.
5
Using AUDIO/VIDEO connectors, connect
AUDIO and VIDEO OUT on your VCR to
AUDIO and VIDEO IN on your TV.
Note:
• To view input from the DBS or VCR, select the video
input which your DBS receiver or VCR is connected
to by pressing TV/VIDEO on the remote control.
VMC-810S/820S (not supplied)
(Rear of TV)
VIDEO (yellow)
AUDIO-L (white)
AUDIO-R (red)
VMC-810S/820S (not supplied)