Using the timer menu, To select the timer 0 menu, Daylight – Sony KV-32XBR48 User Manual
Page 27: Saving, Current time set, On/off timer, Channel, Block
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
© Using the TIMER Menu
(liD
TIMER
► DAYLIGHT SAVING . YES
CURRENT TIME SET
ON/OFF TIMER
CHANNEL BLOCK
DMENU
[5C1
01 0
After setting the clock you can use the timer to
turn the TV on and off.
For detailed information on using the remote
control to modify menu settings, refer to
''Learning Menu Selection" on page 22.
To select the TIMER 0 menu:
Display Highlight ©
Select
♦
Tip
Set daylight saving time before setting the clock. Any
loss of power will cause these settings to be erased.
DAYLIGHT
SAVING
Automatically ad/usts
the time.
CURRENT
TIME SET
Necessary for the
TIMER.
ON/OFF TIMER
Wake up or
scheduled viewing.
CHANNEL
BLOCK
Prevent access
to certain channels.
Spring: Select YES to compensate for Daylight Saving Time.
The current time automatically moves ahead one hour.
Fall: Select NO at the end of Daylight Saving Time.
The current time moves back one hour.
1
Press yt- , then press up or down on the joystick until
the current day (MON-SUN) is displayed, and press ©
2 Press up or down on the joystick until the current hour
(01-12) and AM/PM is displayed, and press © .
3 Press up or down on the joystick until the current
minute (00-59) is displayed, and press © .
The Clock has now started. Press MENU to exit.
CURRENT TIME SET
DMENU
ON -■ OFF TIMER
■ 01 Q
1 Select the desired timer (1 or 2).
2 Press up or down on the joystick until the desired day
(MON-SUN) or range of days (EVERY SUN-SAT or
EVERY MON-FRI) is displayed, and press © .
3 Press up or down on the joystick until the time (hours and
minutes) that you want the TV to remain on is displayed, and press © .
4 Press up or down on the joystick to set the time duration (maximum of 6 hours)
and press © . TO CANCEL THE TIMER FUNCTION, PRESS RESET.
5 Press up or down on the joystick to select the desired channel and press © .
The timer is now set. The TIMER indicator on your TV will be lit.
Press MENU to exit. Performing AUTO PROGRAM will erase all TIMER settings.
You will be able to block two channels for a period of up to 12 hours.
FOLLOW STEPS 1-5 OF "ON/OFF TIMER" ABOVE
To erase your CHANNEL BLOCK settings, press RESET
while in the CHANNEL BLOCK window. Performing AUTO
PROGRAM will erase your CHANNEL BLOCK settings.
CHANNEL BLOCK
Use
OI Q
SUN 12:00AM
25