Nikon AC-2WE - Manual (Page 43)

■iiwwtatssiii
Modifying data loading options
Data loading options can be modified only when no shooting data is stored in the
camera's memory and the fiim counter shows “E”, The modified data ioading options
will be activated after you load a new roll of film and it advances to the first framp.
1. On the F90/F90X (N90/N90s) Shooting Data dialog box, select one of the four
memory modes: “Cancel storage of shooting data,” “Store minimum shooting
data”, “Store medium shooting data”, and “Store maximum shooting data”.
(“Cancel storage of shooting data” is the default setting.)
2. Select one of the following options: “Turn power switch OFF then ON” or
“Download stored data”. (“Turn power switch OFF then ON” is the default setting.)
3. Click “Modify" to modify the data loading options on the camera body, as selected
in the dialog box,
• For details, see the help message for the F90/F90X (N90/N90s) Shooting Data dia­
log box.
F90/F90X (N90/N90S) shooting data to be stored and data storing capacity:
Type of data
to be stored Shooting data items
Data storing capacity
(no. of rolls of film)
F90/N90
F90X/N90S
Minimum data Shutter speed, aperture Approx. 5 Approx. 99
Medium data
“Minimum data” items plus metering system,
exposure mode, flash sync mode, focal length set
on the lens
Approx. 3 Approx, 50
Maximum data
“Medium data” items plus exposure
compensation value, flash output level
compensation value Approx. 2 Approx. 34
* When using 36-exposure film. Data storage capacity varies according to the
number of frames shot and/or if multiple exposure shooting is conducted.
Downloading shooting data from the F90/F90X (N90/N90s) camera body
1. On the F90/F90X (N90/N90s) Shooting Data dialog box, click “Load” to activate
the Data Loading dialog box. (Fig. 27)
Data Loading
|cAf90
Fite name
(Fig. 27)
30