4 a close the camera, Back, Basic operation »continued – Nikon FM2 User Manual
Page 14
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
BASIC OPERATION »continued
4 A
Close the camera
back.
Close the camera back until it snaps shut,
making sure that the perforations are
perfectly meshed with the sprockets and
that the film is set between the film guide
rails ®.
4 o Take up film slack.
Fold out the film rewind crank
®) and rotate it in the direction of the
arrow on the film rewind knob until it
stops. Then fold the crank back in.
4^ Make blank exposures
until the frame
counter
®
reaches frame 1.
Press the shutter release button and wind
the film advance lever until the frame
counter reaches frame 1. As you wind the
lever, confirm that the film rewind knob
rotates counterclockwise. This indicates
the film has been loaded and is being
advanced correctly. If the knob fails to
rotate, reload the film cartridge.
10