Ready-light status per shutter speed dial setting – Nikon FM2 User Manual
Page 47
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Ready-Light Status Per Shutter Speed Dial Setting
Shutter speed dial
Speedlight charging
Speedlight charging
setting
complete
incomplete
1/4000 sec. ~ 1/500 sec.
Blinks
Off
1/250 sec.-l sec.
Lights up continuously
Off
B
Lights up continuousiy
Off
Notes:
1) No matter how the shutter speed dial is set, the speedlight will tire
when the ready-light is on the moment the shutter release button is
depressed.
2)
The ready-light will function regardless of whether the camera's ex
posure meter is on or off.
3)
When the camera's exposure meter is on, the LED exposure display
inside
the
viewfinder
shows
the
exposure
condition
of
the
moment
regardless of whether or not the flash fires. If the shutter speed is set
at B, the LED exposure display will not be activated.
Caution:
For flash photography, it is recommended that you use a Nikon
dedicated electronic flash unit which operates at a low voltage current.
Use of any other flash which operates at high voltages may damage the
camera's
circuitry.
Any
damage
caused
by
such
use
is
not covered by
the Nikon Warranty.