Exposure display – Nikon FM2 User Manual

Page 29

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Exposure display

The LED exposure indicator iamps can be seen on the right side

of the viewfieid frame within the viewfinder. The shutter speed

number and f/number in use are aiso visibie. The LED exposure

display indicates exposure five ways, as shown in the table

below, in accordance with the conditions of each exposure.

Overexposure by more than 1 stop

Overexposure by 1/5 to 1 stop

Correct exposure

Underexposure by 1/5 to 1 stop

Underexposure by more than 1 stop

As correct exposure is approached, the LED exposure display

inside the viewfinder is liable to change rapidly and easily within

the very narrow range, so it is important to turn the lens aper­
ture ring and shutter speed dial carefully. Although intermediate
shutter speeds cannot be used, intermediate lens apertures
can—just turn the aperture ring for fine adjustment.

Note: When the shutter speed dial is set at B (bulb), the LED exposure

display inside the viewfinder is turned off.

21

Advertising