Nikon Reflex - NIKKOR 500mm f-8 - Manual (Page 11)

SPECIFICATIONS
Focal length; 500mm
Maximum aperture: f/8
Lens construction: 6 elements in 6 groups
Picture angle: 5°
Diaphragm: Fixed
Meter coupling shoe: Not provided
Focusing range: Infinity (~) to 1.5m (5ft)
Distance scale; Graduated in both meters and feet
Filter: 39mm diameter screw in; L37C, 056, A2, B2 and ND4 provided
Mount: Nikon bayonet mount
Attachment size: 82mm (P=0.75mm)
Dimensions: Approx. 89mm dia. xl09mm extension from flange; 116mm long (overall)
Weight; Approx. 840g
- - -_____________________________________
___________________^
____________
-■ ^
ACCESSORIES
Supplied Optional
Slip-on plastic front lens cap Other 39mm screw-in filters
Rear lens cap LF-1 Teleconverter TC-14A*
Screw-in lens hood HN-27 Teleconverter TC-14B
39mm screw-in filters
Teleconverter TC-201
(L37C, 056, A2, B2, ND4)
Filter case CA-2
Hard lens case CL-39
other performance deterioration may be noticeable in the
t.
* Usable, but vignetting or „
image recorded on the film.
LENS CARE
• Although you should always keep the lens surfaces clean, rough cleaning must be
avoided. Wipe with a soft, clean cotton cloth moistened with alcohol to remove
grease or fingerprints from the lens surfaces.
If you use ether in cleaning the lens, a smudge sometimes appears on the surface of a
multi-coated lens. If this happens, wipe it again with a cotton cloth moistened with
alcohol.
• Keep the lens cap in place whenever the lens is not in use.
• Attach both the front and rear caps when the lens is stored separately.
• To ensure proper fit of the lens when stored in the leather lens case, set the lens’
focusing ring to the infinity (“>) setting.
11