With thesb-16a, Controls in detail —continued – Nikon SPEEDLIGHT SB-16 User Manual
Page 50
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
CONTROLS IN DETAIL —continued
With theSB-16A
As soon as the flash unit is turned on, both ready-lights
blink in the following cases:
1) When the AS-8's mounting foot is not securely locked.
2) When using the TTL mode with the Nikon F3-series
camera and the camera’s film speed setting is set well
beyond the usable range of ASA/ISO 25~400, without
exposure compensation.
3) When the shooting mode selector is set at TTL with
any camera other than the Nikon F3-series.
Note that when the shutter speed setting on the Nikon FE
or FM2 is improper for correct flash synchronization and
the camera’s meter is on (only in the case of the FE), just
the camera’s ready-light blinks as a warning, while the
one on the flash unit does not blink but simply lights up to
indicate when the flash is ready to fire.
38