Sync/multiple flash terminal, Ttl multiple flash terminal – Nikon SPEEDLIGHT SB-16 User Manual
Page 61
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Sync/Multiple Flash Terminal ®
Located at the side of the AS-8 or AS-9 is a threaded
terminal which serves two purposes: it can be used to
attach a sync cord to the SB-16 for off-camera operation
or you can attach a second electronic flash in series for
manual multiple lighting setups. (For more detailed infor
mation about manual multiple flash, refer to pages 58
and 62.)
Notes:
1)
W hen the SB-1
6
is used ofl-camera via a sync cord, ready-iight indica
tion inside the camera's viewfinder and automatic sync speed setting are
not avaiiable, and TTL auto flash operation cannot be performed.
2)
W hen attached to an all-metallic accessory shoe, such as the one on
the Nikkormat FTN camera, the SB-16 does not fire even if it is con
nected to the camera body with a sync cord. In this case, isolate the
flash contact with vinyl tape or use the optional accessory sync cord,
SC-IOas required.
47